通过使用CCG1,将USB 电源供应添加到任意架构内变得 更加方便,这是因为CCG1 提供了控制信号(用于管理外部VBUS 和VCONN 电源管理解决方案)以及外部复用控制信号(用于大 部分使用单线缆的对接解决方案)。
- USB Power Delivery (PD) Controller
- Mode Configuration for Source (Host), Sink
(Device), or Source-Sink - Bi-Phase Marked Encoding/Decoding (BMC)
- Physical Layer (PHY) Protocol
- Policy Engine
- Configurable at Boot and Host-Controlled
- USB Type-C Specification Compliant
- Detect USB Cable Plug Attach
- Cable Orientation and Role Detection
- Assign CC and VCONN Pins
- Advertise Default, 1.5 A or 3 A for Type-C
Power
- Port Power Switch
- 5-V, 3-A Switch to VBUS for Type-C Power
- 5-V to 20-V, 3-A Bidirectional Switch to or from
VBUS for USB PD Power - 5-V, 600-mA Switches for VCONN
- Over-Current Limiter, Overvoltage Protector
- Slew Rate Control
- Hard Reset Support
- Port Data Multiplexer
- USB 2.0 HS Data, UART Data, and Low
Speed Endpoint - Sideband Use Data for Alternate Modes
(DisplayPort and Thunderbolt™)
- Power Management
- Gate Control and Current Sense for External
5-V to 20-V, 5-A Bi-directional Switch
(Back-to-Back NFETs) - Power Supply from 3.3-V or VBUS Source
- 3.3-V LDO Output for Dead Battery Support
相比之下TI的开发板就略显简约,哇卡卡,,没有Type C的设备,貌似还不好玩起来。。。
3、恩智浦
PTN5100 is a single port USB Type-C Power Delivery (PD) PHY and Protocol IC that provides Type-C Configuration channel interface and USB PD Physical and Protocol layer functions to a System PD Port Policy Controller (Policy Engine and Device Policy Manager, Alternate mode controller). It complies with USB PD and Type-C specifications and delta updates of PD spec. This IC is targeted for a wide range of platforms (Standard Notebook PCs, Desktop PCs, Chromebooks, Tablets, Convertibles, Smart phones) and PC Accessories (e.g. Docks, Monitors, Cable adapters etc.) applications. PTN5100 is architected to deliver robust performance, compliant behavior, configurability and system implementation flexibility that are essential to tide over interoperability and compliance hurdles in the platform applications.
Supports implementation of various system PD roles: P, P/C, C, C/P
Supports Type-C role configurability
Type-C role (DFP, UFP, DRP) is Non-Volatile Memory (NVM) and register
programmable based on OEM platform requirements
Implements UFP role pull down behavior to handle dead battery condition on
battery powered platforms
Supports register programmable and variable ‘Rp’ indication (for DRP/DFP usage
and accessory detection)
Implements 'Rd' indication on CC pin (for Device side implementation)
CC detection/indication scheme based on Type-C role
Indication of orientation detection via CC_ORIENT pin and status register(s)
Debug and Audio Accessory detection and indication in status register(s)
赛普拉斯、TI、NXP也都是大家耳熟能详的大厂商了,你更看好哪一家的产品呢,来个投票吧