MSP430F2132串口通信老是不行？

Jacktang

MSP430F2132串口通信老是不行？ [复制链接]

#include "msp430x21x2.h"


void main(void)
{
WDTCTL = WDTPW + WDTHOLD; //关闭看门狗
if (CALBC1_1MHZ ==0xFF || CALDCO_1MHZ == 0xFF)
{
while(1); // If calibration constants erased
// do not load, trap CPU!!
}
BCSCTL1 = CALBC1_1MHZ; // Set DCO
DCOCTL = CALDCO_1MHZ;
P3SEL = 0x30; // P3.4,5 = USCI_A0 TXD/RXD
UCA0CTL1 |= UCSSEL_2; // SMCLK
UCA0BR0 = 8; // 1MHz 115200
UCA0BR1 = 0; // 1MHz 115200
UCA0MCTL = UCBRS2 + UCBRS0; // Modulation UCBRSx = 5
UCA0CTL1 &= ~UCSWRST; // **Initialize USCI state machine**
IE2 |= UCA0RXIE; // Enable USCI_A0 RX interrupt
IE2 |= UCA0TXIE;
__bis_SR_register(LPM0_bits + GIE); // Enter LPM0, interrupts enabled
}


// Echo back RXed character, confirm TX buffer is ready first
#pragma vector=USCIAB0RX_VECTOR
__interrupt void USCI0RX_ISR(void)
{
while (!(IFG2&UCA0TXIFG)); // USCI_A0 TX buffer ready?
UCA0TXBUF = UCA0RXBUF; // TX -> RXed character
}

timvim11152

我還是msp430新手說錯請多多包涵 這是我個人的見解我覺得是IE2 |= UCA0TXIE;這行去掉就能傳了