U-Boot 1.1.6 (Mar 11 2011 - 14:13:57) for SMDK6410
CPU:
S3C6410@800MHz
Fclk = 800MHz, Hclk = 133MHz, Pclk = 66MHz, Serial = CLKUART (SYNC Mode)
Board: SMDK6410
DRAM: 256 MB
Flash: 0 kB
NAND: Maf. ID is d3
1024 MB
MMC: => rca=0x0000af56
1877 MB
Command NOT Complete
*** Warning - bad CRC or MoviNAND, using default environment
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x40000, size 0x300000
按键不起作用,在dnw软件中显示如上,不知道咋回事!还望大神指点!