IAR5.4+J_link V8调试stm32f103无法到达中断

worksnfkpynn99

IAR5.4+J_link V8调试stm32f103无法到达中断 [复制链接]

图片上有文字描述

1. void Bus_Init(void)
   {
   //-----------SPI-------------
   SPI_InitTypeDef SPI_InitStructure;
   
   RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2,ENABLE);
   RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1,ENABLE);
   
   //------------------------------SPI1------------------------------
   DISABLE_TP(); //必须先禁能,才能改变MODE
   SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex; //两线全双工
   SPI_InitStructure.SPI_Mode = SPI_Mode_Master; //主
   SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b; //8bit
   SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low;
   SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge; //数据捕获于第1个时钟沿
   SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
   SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_64;
   SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
   SPI_InitStructure.SPI_CRCPolynomial = 7;
   SPI_Init(SPI1,&SPI_InitStructure);
   
   ENABLE_TP();
   SPI_Cmd(SPI1,ENABLE);
   
   //------------------------------SPI2------------------------------
   
   DISABLE_MRF(); //必须先禁能,才能改变MODE
   SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex; //两线全双工
   SPI_InitStructure.SPI_Mode = SPI_Mode_Master; //主
   SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b; //8bit
   SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low; //时钟悬空为低
   SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge; //数据捕获于第1个时钟沿
   SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
   SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_64;//主频64分步
   SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB; ////高位在前
   SPI_InitStructure.SPI_CRCPolynomial = 7;
   SPI_Init(SPI2,&SPI_InitStructure);
   
   ENABLE_MRF();
   SPI_Cmd(SPI2,ENABLE);
   
   //--------------I2C--------------
   //I2C_Configuration();
   // delay_ms(1);
   
   //------------FSMC--------------
   
   LCD_FSMCConfig();
   LCD_Init();
   
   
   //-----------TOUCH-------------
   
   //Read_Ads7843();
   /*if(Get_Adjdata()==0)
   {
   LCD_Clear(WHITE);
   LCD_BL_ON();
   Touch_Adjust();
   }
   */
   //------------USB---------------
   RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_1Div5);
   RCC_APB1PeriphClockCmd(RCC_APB1Periph_USB, ENABLE);
   USB_Init();
   }

复制代码

查看本帖全部内容，请登录或者注册