刚刚为了开发板的lcd是否是触屏的问题查了一下ti的官网 , 为了方便大家顺便贴出官方板的列表
https://estore.ti.com/DK-LM3S9B96-LM3S9B96-Development-Kit-P1902.aspx
Stellaris DK-LM3S9B96 Development Kit provides a feature-rich
development platform for Ethernet, USB OTG/Host/Device, and CAN enabled
Stellaris ARM® Cortex™-M3-based microcontrollers. Each board has an
In-Circuit Debug Interface (ICDI) that provides hardware debugging
functionality not only for the on-board Stellaris devices, but also for
any Stellaris microcontroller-based target board. The development kit
contains all cables, software, and documentation needed to develop and
run applications for Stellaris microcontrollers easily and quickly. The
Stellaris DK-LM3S9B96 Development Kit features: StellarisWare®
Peripheral Library, USB Library, and Graphics Library in conjunction
with ARM development tools from ARM tools partners. Kits feature:
- Stellaris LM3S9B96 MCU with fully-integrated Ethernet, CAN, and USB OTG/Host/Device
- Bright 3.5" QVGA LCD touch-screen display
- Navigation POT switch and select pushbuttons
- Integrated Interchip Sound (I2S) Audio Interface
- 8 MB SDR SDRAM module (attaches through the EPI signal breakouts)
- MicroSD card interface
- LM3S9B96 I/O available on labeled break-out pads
- ARM® 10-pin JTAG debug connector with input and output modes
- 1 GB MicroSD Card, 128 MB USB Flash Drive
- Ethernet cable, CAN ribbon cable, USB and JTAG cables
- CD containing: evaluation version of the software tools, complete
documentation, quickstart guide and source code, and Stellaris
Peripheral Driver Library and example source code.
|