|
WINCE启动后无法获得主机IP?无法同步调试
[复制链接]
我通过TCPIP把NK下到开发板!不能自动启动,串口到KITL..就停止了.但NK已经下载完成.
关闭开发板电源再启动,WINCE可以启动,但在串口输出很多错误信息:
Board Name =
InitClock...
Processor = 199Mhz, Bus = 99Mhz
OEMGetExtensionDRAM
Sp=ffffc7cc
ISL1208 write failed 1111
ISL1208 read failed 1111
Test ISL1208, failed to read
VBridge:: VB_INITIALIZED returns [0]
VMini:: VBridge is not initialized! Bail out..
OEMSetWakeupSource dwSource = 0x18
DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Driver
s\BuiltIn\AFD). Driver cannot be unloaded.
DeviceFolder::LoadDevice!Enumerate Fou
nd deprecated load instructions at (Drivers\BuiltIn\PPP). Driver cannot be unloa
ded.
Init Raster engine
Clearing screen
Returning from DDI init
Lyg.p: Layout Manager successfully initialized to 1
OEMResetWakeupSource dwSource = 0x11
OEMSetWakeupSource dwSource = 0x11
Maximum Allowed Error 768:
Explorer(V2.0) taskbar thread started.
2.开发板上的系统也出现错误对话框(windows ce Networking)提示::DHCP was unable to obtain an ip address...
|
|