ce 6 eboot 下载NK 启动后挂了

s21118666

ce 6 eboot 下载NK 启动后挂了 [复制链接]

平台2440  使用NBOOT+EBOOT  下载NK
   DNW信息如下   ：


Enter your selection: d
INFO: Probe: DM9000 is detected.
DM9000: MAC Address: 0:11:22:33:44:55
System ready!
Preparing for download...
INFO: *** Device Name 'SMDK244017493' ***
INFO: Using static IP address 1218113.
INFO: Using subnet mask 2525250.
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Packet has the following data:
  boot.bin[NULL]octet[NULL]
TFTP packet could have 1 name/value pairs
Locked Down Link 1
Src IP 192.168.1.173 Port 03D4   Dest IP 192.168.1.175 Port 085C
Default TFTP block size set to: 512 bytes
There were no options detected in the TFTP
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp

BL_IMAGE_TYPE_BIN


Download BIN file information:
-----------------------------------------------------
[0]: Base Address=0x80200000  Length=0xabbcac
-----------------------------------------------------
RAM image
TFTP: Desktop losing ACK, block number = 12167, Ack again
TFTP: Desktop losing ACK, block number = 15635, Ack again
rom_offset=0x0.
TFTP: Desktop losing ACK, block number = 21614, Ack again
ImageStart = 0x80200000, ImageLength = 0xABBCAC, LaunchAddr = 0x8022A73C

Completed file(s):
-------------------------------------------------------------------------------
[0]: Address=0x80200000  Length=0xABBCAC  Name="" Target=RAM
ROMHDR at Address 80200044h
waitforconnect
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
INFO: OEMLaunch: Jumping to Physical Address 0x3022A73Ch (Virtual Address 0x8022A73Ch)...

CWindows CE Kernel for ARM (Thumb Enabled) Built on Sep 30 2007 at 22:37:06
DCache: 8 sets, 64 ways, 32 line size, 16384 size
ICache: 8 sets, 64 ways, 32 line size, 16384 size
Exception 'Prefetch Abort' (3): Thread-Id=005c0002(pth=83f8d264), Proc-Id=00400002(pprc=82008308) 'NK.EXE', VM-active=00400002(pprc=82008308) 'NK.EXE'
PC=00000000(???+0x00000000) RA=c0572990(smflash.dll+0x00002990) SP=d00bec54, BVA=00000000
Exception 'Raised Exception' (-1): Thread-Id=005c0002(pth=83f8d264), Proc-Id=00400002(pprc=82008308) 'NK.EXE', VM-active=00400002(pprc=82008308) 'NK.EXE'
PC=c0035940(k.coredll.dll+0x00015940) RA=8023849c(kernel.dll+0x0000649c) SP=d00be4d0, BVA=ffffffff
PWR: Process Attach
>PWR_Init(D039ECF0)
HW_Init : HW_InitRegisters
HW_Init : CreateEvent
HW_Init : IOCTL_HAL_REQUEST_SYSINTR
INFO: PwrButton: Mapped Irq 0x0 to SysIntr 0x13.
HW_Init : CreateThread
HW_Init : CeSetThreadPriority
HW_Init : Done
>PWR_Open(0xd004df60, 0x0, 0x3)
PCF: HW_Open
>PWR_IOControl(0x321000, 0x0, 0, 0xd004dce8)
>PWR_Open(0xd004df60, 0x0, 0x3)
PCF: HW_Open
PWR_Close(0xd004df60)
PCF: HW_Close
就卡这不动了   对NK信息不是很了解    麻烦大虾们帮忙看看问题出哪了

fl1987

下载及烧录已经完成，并且开始执行nk了。

现在是PCF: HW_Close之后停止了。

最好用debug模式，看看在PCF: HW_Close之后执行的是什么驱动。

guangxv

  我把所有的驱动都不加载还是不行  等会贴上不加载驱动的DNW信息  我换DEBUG模式好了  

xsyxxxxx

d都给你好了  把这帖结了