IAR 7.1支持TI的XDS100仿真器了！

dontium

IAR 7.1支持TI的XDS100仿真器了！ [复制链接]

IAR 7.1支持TI的XDS100仿真器了！
Hardware debugging support:

Probe (JTAG/SWD)	Note
I-jet	Supports all ARM7,ARM9,ARM11 and Cortex-M/R/A cores. Enables power debugging.
JTAGjet-Trace	Supports ETM on all ARM7,ARM9,ARM11 and Cortex-M/R/A cores.
JTAGjet	Supports all ARM7,ARM9,ARM11 and Cortex-M/R/A cores.
J-Link	Supports all ARM7,ARM9,ARM11 and Cortex-M/R/A cores.
J-Link Ultra	Supports all ARM7,ARM9,ARM11 and Cortex-M/R/A cores. Supports power debugging on Cortex-M4/M5 cores.
J-Trace	Supports ETM on all ARM7, ARM9 and Cortex-M3/M4 cores, and JTAG/SWD on the same cores as J-Link.
RDI	Supports RDI (Remote Debug Interface) based debug probes.
GDB server
Jeeni EPI
Stellaris FTDI	LMI FTDI driver
Stellaris ICDI
Macraigor OCDemon	mpDemon, usbDemon, usb2Demon, usb2Sprite
P&E Micro JTAG probes	Multilink, Cyclone, OSJTAG
STMicroelectronics ST-LINK V2	Supports STM32 devices
STMicroelectronics ST-LINK	Supports STM32 devices
SAM-ICE	Supports Atmel AT91SAM devices
J-Link Lite LPC Edition	Supports ARM based devices from NXP
mIDASLink	Supports devices from Analog Devices
DIGI JTAG Link	Supports DIGI devices
XDS100	Supports TI devices

airqj

6.4还是6.7的时候已经支持了

youluo

我还在用5.3呢。下载地址呢。。

dontium

youluo 发表于 2014-3-20 10:03
我还在用5.3呢。下载地址呢。。

官网下载。本坛有破解文件。

gotodo

我的xds100在IAR 7.1下“download and  debug"失败，工程如附件所示，请已经可以正常的指导一下。
同样的代码我xds100在CCS5.5下可以正常下载和调试。