为什么我的stm32中断处理程序没有响应?

Crystal_oscilla

为什么我的stm32中断处理程序没有响应? [复制链接]

1. 为什么我的stm32中断处理程序没有响应?
   PA1->LED1 PA2->LED2
   
   PC0->KEY1 PC1->KEY2
   
   主程序
   
   #include "stm32f10x.h"
   #include "stm32f10x_conf.h"
   extern void Delay(vu32 nCount);
   void RCC_Config(void);
   void GPIO_Config(void);
   void EXTI_Config(void);
   void NVIC_Config(void);
   int main(void)
   {
   //SystemInit();
   RCC_Config();
   GPIO_Config();
   EXTI_Config();
   NVIC_Config();
   
   while (1)
   {
   
   }
   }
   
   void RCC_Config(void)
   {
   RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_GPIOC|RCC_APB2Periph_AFIO, ENABLE);
   /*开时钟*/
   }
   void GPIO_Config(void)
   {
   GPIO_InitTypeDef GPIO_InitStructure;
   GPIO_InitStructure.GPIO_Pin =GPIO_Pin_1|GPIO_Pin_2;
   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
   GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
   GPIO_Init(GPIOA, &GPIO_InitStructure);
   
   GPIO_InitStructure.GPIO_Pin =GPIO_Pin_0|GPIO_Pin_1;//KEY
   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
   GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
   GPIO_Init(GPIOC, &GPIO_InitStructure);
   }
   
   void EXTI_Config(void)
   {
   GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource0);
   EXTI_InitTypeDef EXTI_InitStructure;
   EXTI_InitStructure.EXTI_Line = EXTI_Line0;
   EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
   EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling;//下降沿
   EXTI_InitStructure.EXTI_LineCmd = ENABLE;//中断使能
   EXTI_Init(&EXTI_InitStructure);
   
   GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource1);
   EXTI_InitStructure.EXTI_Line = EXTI_Line1;
   EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
   EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling;//下降沿
   EXTI_InitStructure.EXTI_LineCmd = ENABLE;//中断使能
   EXTI_Init(&EXTI_InitStructure);
   }
   
   void NVIC_Config(void)//中断嵌套优先级设置
   {
   NVIC_InitTypeDef NVIC_InitStructure;
   
   NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);//1组
   
   /* Enable the EXTI0_IRQn Interrupt */
   NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQn;//0
   NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
   NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
   NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
   NVIC_Init(&NVIC_InitStructure);
   
   /* Enable the EXTI1 Interrupt */
   NVIC_InitStructure.NVIC_IRQChannel = EXTI1_IRQn;//1
   NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
   NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
   NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
   NVIC_Init(&NVIC_InitStructure);
   }
   
   
   中断处理程序
   void EXTI0_IRQHandler(void)
   {
   int i;
   if(EXTI_GetITStatus(EXTI_Line0) != RESET)
   {
   /* Clear the Key Button EXTI line pending bit */
   EXTI_ClearITPendingBit(EXTI_Line0);//清中断标志位
   for(i=0;i<2;i++)
   {
   GPIO_SetBits(GPIOA, GPIO_Pin_1);//GPIOB.5=1
   Delay(0xfffff);
   GPIO_SetBits(GPIOA, GPIO_Pin_2);//GPIOB.6=1
   Delay(0xfffff);
   GPIO_ResetBits(GPIOA, GPIO_Pin_1);//GPIOB.5=0
   Delay(0xfffff);
   GPIO_ResetBits(GPIOA, GPIO_Pin_2);//GPIOB.6=0
   Delay(0xfffff);
   }
   }
   }
   void EXTI1_IRQHandler(void)
   {
   int i;
   if(EXTI_GetITStatus(EXTI_Line1) != RESET)
   {
   /* Clear the Key Button EXTI line pending bit */
   EXTI_ClearITPendingBit(EXTI_Line1);//清中断标志位
   for(i=0;i<2;i++)
   {
   GPIO_SetBits(GPIOA, GPIO_Pin_1);//GPIOB.7=1
   Delay(0xfffff);
   GPIO_SetBits(GPIOA, GPIO_Pin_2);//GPIOC.8=1
   Delay(0xfffff);
   GPIO_ResetBits(GPIOA, GPIO_Pin_1);//GPIOB.7=0
   Delay(0xfffff);
   GPIO_ResetBits(GPIOA, GPIO_Pin_2);//GPIOB.8=0
   Delay(0xfffff);
   }
   }
   }
   
   
   extern void Delay(vu32 nCount) //简单的长时间延时函数
   {
   int i; //声明内部递减变量
   for(; nCount!= 0; nCount--) //递减变量计数
   {
   for (i=0; i<0xffff; i++);
   }
   }
   

复制代码