*6:With support from the STK501 and ATADAPCAN1 adapters.
*7:With support from the STK520 adapter.
*8:In
addition to be supported on the STK500 motherboard, this part is also
supported on the STK505 Top Module for easier strapping.
*9:ATmega406
pin out is not supported by the motherboard or any top module. However
High Voltage Parallel Programming is included in the STK500 FW.
*10:With support from the STK525 adapter.
*11:With support from the STK526 adapter.
New devices will be supported through updates of AVR Studio. Please visit www.atmel.com to download the latest version.
以下是官方的描述:
ATSTK500
Description:
The
Atmel AVR® STK500 is a starter kit and development system for Atmel's
AVR Flash microcontrollers. The STK500 gives designers a quick start to
develop code on the AVR combined with features for using the starter kit
to develop prototypes and test new designs. The STK500 interfaces with
AVR Studio®, Atmel's Integrated Development Environment (IDE) for code
writing and debugging.
Expansion cards are available for the different AVR sub-families and larger devices.
The AVR Studio online-help contains the most current information and a complete list of supported devices
Ordering Code: ATSTK500
Documents:
AVR068: STK500 Communication Protocol(Application Note, 37 pages, revision C, updated 06/06) The
document describes version 2.0 of the Atmel STK500 and the PC
controlling the STK500 communication protocol. The firmware is
distributed with AVR Studio 4.11 build 401 or later.
Using the STK500 as an AT89C51Rx2 Target Board(Application Note, 7 pages, updated 7/04) This Application Note explains how to use the STK500 as a development board for 8051 Architecture microcontrollers.
AVR STK500 Starter Kit and Development System(Flyer, 2 pages, updated 9/02)
AVR061: STK500 Communication Protocol(Application Note, 31 pages, revision B, updated 4/03) This
document describes the protocol for the STK500 starterkit. This
protocol is based on earlier protocols made for other AVR tools and is
fully compatible with them in that there should not be any overlapping
or redefined commands.
STK500 User Guide - NOTE: See AVR Studio Help files for latest information (User Guide, 61 pages, updated 3/03)