程序load的问题

211wujianhua

程序load的问题 [复制链接]

程序不能load的问题

使用的是xds仿真器,用的是dm643的片子,
为什么在emmulator 下ccs3.1 file下的load program显示的是灰色的?

gskinggs

连接上了么？看看
Debug菜单->Connect
如果这个是黑的，选它。

glabhenly

选了
可是出现了错误,

Error connecting to the target:
Error 0x80000240/-172
Fatal Error during: Initialization, OCS,
This error was generated by TI\'s USCIF driver.

SC_ERR_REG_DETECT_SPRT <-172>
The wrong support-logic port value has been used.
A controller cannot be detected even though the
selected port does match the hardware configuration.
The standard 560 ports are 0x0, 0x1, 0x2 and 0x3.
The standard EVM ports are 0x0, 0x1, 0x2 and 0x3.
The standard DSK ports are 0x378, 0x278 and 0x3BC.
The standard 510 ports are 0x240, 0x280, 0x320 and 0x340.


Sequence ID: 0
Error Code: -172
Error Class: 0x80000240
I/O Port = 240

Board Name: C64xx XDS510 Emulator
Cpu Name: CPU_1

Abort:                Close Code Composer Studio.
Retry:                Try to connect to the target again.
Cancel:                Remain disconnected from the target
Diagnostic:        Run diagnostic utility.

thanks

starss

看英语说是port的设置不对。

car

那怎么改呢,我在ccs setup里把io 改为0x340也不对啊

strongli2008

我不清楚应该你的端口应该如何设置
我的XDS510 USB的端口是0x510

huaqingyou

oh,my god, 不是说只能为0x240 - 0x340间的几个固定的值吗?这个IO指的是什么啊?

wwp

试过了,改为0x510还是不行,会不会是硬件出了问题啊?

alibj

可能是setup的设置不对吧,不同厂家的仿真器可能需要不同的configuration file,在仔细看看仿真器的说明书.