用串口调试助手的问题!!

hecf034

用串口调试助手的问题!! [复制链接]

Debug Serial Init

SysInit: GDTBase=8088e0e0 IDTBase=808af7e0 KData=808b5800
Windows CE Kernel for i486 Built on Jun 24 2004 at 18:23:42
g_pPageDir = 808b6000
X86Init done, OEMAddressTable = 80243b18.
Checking if extended keep alive timeouts feature is set...Yes
SENDING command id 0x03E8 to CDialog target.
SENDING command id 0x03E9 to CDialog target.
SENDING command id 0x03E9 to CDialog target.
SENDING command id 0x03E9 to CDialog target.
SENDING command id 0x03E9 to CDialog target.
SENDING command id 0x0002 to CDialog target.
上面是用串口调试助手接收区中出现的数据
当我在模拟器中运行WINCE程序时出现
Debug Serial Init

SysInit: GDTBase=8088e0e0 IDTBase=808af7e0 KData=808b5800
Windows CE Kernel for i486 Built on Jun 24 2004 at 18:23:42
g_pPageDir = 808b6000
X86Init done, OEMAddressTable = 80243b18.
Checking if extended keep alive timeouts feature is set...Yes
当我打开WINCE程序串口时出现
SENDING command id 0x03E8 to CDialog target.
当发送数据时出现
SENDING command id 0x03E9 to CDialog target.
退出程序时出现
SENDING command id 0x0002 to CDialog target.
怎么样才能正常通信

fpb79

我也出现了这个问题，求解答