【2024 DigiKey 创意大赛】”双光融合“智能热像仪第三部分：触摸屏制作/双光融合

JOEYCH · 发表于2024-10-19 21:50

【2024 DigiKey 创意大赛】”双光融合“智能热像仪第三部分：触摸屏制作/双光融合 [复制链接]

# 【2024 DigiKey 创意大赛】”双光融合“智能热像仪第三部分：触摸屏制作/双光融合

## 一、触摸屏制作

### 1.1 绘制原理图和PCB：

<ignore_js_op>

<a href="javascript:;" onclick="showWindow(this.id, this.getAttribute('url'), 'get', 0);" id="savephoto_853047" url="home.php?mod=spacecp&ac=album&op=saveforumphoto&aid=853047&handlekey=savephoto_853047">保存到相册</a>

</p>

</div>
<div class="tip_horn"></div>
</div>

</ignore_js_op>

### 1.2 触摸屏驱动
将下列代码单独放在openmv弹出的U盘中，命名为`screen.py`。

```python
# 作者：程欢欢的智能控制集
import lcd
from pyb import Pin, SPI, millis, hard_reset
import struct
from sensor import alloc_extra_fb, snapshot, RGB565
from time import sleep

x = 0
y = 0
z = 0
press = False
x_original = 0
y_original = 0
z_original = 0
press_threshold = 2800

# Calibration data
calibration_data = [
  29532, 796, -89.8,  # x_min, x_max, x_step
  1976, 30872, 120.4, # y_min, y_max, y_step
  27492.0, 17716, -35.0, 10.8667# z_min, z_max, z_x_step, z_y_step
]
calibration_coordinate = ((80, 60), (240, 60), (80, 180), (240, 180))
baudrate = 80

spi2 = SPI(2, SPI.MASTER, baudrate=40*1000000, phase=1)
CS = Pin('P3', Pin.OUT_PP)
RS = Pin('P8', Pin.OUT_PP)

# Functions for writing to the display
def write_c(c):
  CS.low()
  RS.low()
  spi2.send(c)
  CS.high()

def write_d(c):
  CS.low()
  RS.high()
  spi2.send(c)
  CS.high()

def write_command(c, *data):
  write_c(c)
  if data:
  for d in data:
    write_d(d)

def set_resolution(x, y, w, h):
  write_c(0x2a)
  write_d(int(x / 256))
  write_d(x % 256)
  write_d(int((x + w - 1) / 256))
  write_d((x + w - 1) % 256)
  write_c(0x2b)
  write_d(int(y / 256))
  write_d(y % 256)
  write_d(int((y + h - 1) / 256))
  write_d((y + h - 1) % 256)
  write_c(0x2C)

def init(screen_baudrate=80, pressure=1800):
  global calibration_data, baudrate, press_threshold
  press_threshold = 5000 - pressure
  lcd.init(width=320, height=240, triple_buffer=False, rgb=True)
  write_c(0x36)# Set screen direction
  write_d(0xa0)
  set_resolution(0, 0, 320, 240)# Set screen resolution
  baudrate = screen_baudrate
  try:
  from screen import calibration
  calibration_data = calibration.data
  except:
  touch_calibration()

def touch_calibration():
  # Calibration logic
  ...

def display(img):
  # Touch display logic
  ...
```
## 二、双光融合的实现
### 主要思路：
对于可见光图像和热图像分别创建两张图片（帧缓冲区），按比例缩放至合适的大小，然后将两个图片按比例相叠加产生融合图像。对于触摸屏，根据照片的尺寸大小和MLX90640传回的原始数组数据计算出映射关系，实现触摸屏返回的像素和温度数据相对应

<ignore_js_op>

<a href="javascript:;" onclick="showWindow(this.id, this.getAttribute('url'), 'get', 0);" id="savephoto_853046" url="home.php?mod=spacecp&ac=album&op=saveforumphoto&aid=853046&handlekey=savephoto_853046">保存到相册</a>

</p>

</div>
<div class="tip_horn"></div>
</div>

</ignore_js_op>

代码如下：
```python
import sensor
import image
import time
import fir
import gc
from screen import screen
from ulab import numpy as np

# Parameters
kernel_size = 1# kernel width = kernel height = (size*2)+1
kernel = [+1, +1, +1, +1, -9, +1, +1, +1, +1]
thresholds_binary = [(50, 200)]# grayscale thresholds
thresholds_track = (0, 100, -7, 69, 25, 127)
white = (255, 255, 255)
frame_count = 0

gc.collect()
# Initialize camera
sensor.reset()
sensor.set_pixformat(sensor.RGB565)
sensor.set_framesize(sensor.QQVGA)
sensor.set_auto_gain(False)
sensor.set_auto_whitebal(False)
sensor.skip_frames(time=2000)

# Initialize thermal sensor
fir.init(type=fir.FIR_MLX90640, refresh=32)
screen.init()

# Allocate buffer for IR image
ir_buffer = image.Image(fir.width(), fir.height(), sensor.RGB565)

# Scale factors
x_scale = sensor.width() / ir_buffer.width()
y_scale = sensor.height() / ir_buffer.height()

clock = time.clock()

while True:
  clock.tick()
  img = sensor.snapshot()
  if frame_count % 10 == 0:
  gc.collect()

ta, ir, to_min, to_max = fir.read_ir()
  ir_raw = np.array(ir).reshape((fir.width(), fir.height()))
  fir.draw_ir(ir_buffer, ir, alpha=256)
  img.draw_image(ir_buffer, 0, 0, x_scale=x_scale, y_scale=y_scale, alpha=128, hint=image.BILINEAR)

if screen.press:# If touch screen is pressed
  img.draw_circle(screen.x, screen.y, 5, color=(255, 0, 0))
  img.draw_string(screen.x + 5, screen.y - 5, "%0.2f C" % ir[(screen.y // 5 - 1) * 32 + screen.y // 5], color=white, scale=1, mono_space=False)

img.draw_string(2, sensor.height() - 10, "Min: %0.2f C" % to_min, color=white, scale=1, mono_space=False)
  img.draw_string(2, sensor.height() - 20, "Max: %0.2f C" % to_max, color=white, scale=1, mono_space=False)
  img.draw_string(2, sensor.height() - 30, "FPS: %0.2f " % clock.fps(), color=white, scale=1, mono_space=False)

img.compress(quality=90)
  screen.display(img)

if frame_count % 30 == 0:
  print(clock.fps())

frame_count += 1
```

秦天qintian0303 · 发表于2024-10-22 09:04

看着就像是正常的图像蒙上了一层轻轻的热成像

【2024 DigiKey 创意大赛】”双光融合“智能热像仪第三部分：触摸屏制作/双光融合 [复制链接]

最新回复