Xilinx 三态以太网 MAC 核是可参数化内核,特别适于交换机和路由器等网络设备。
The TEMAC core is ideally suited for the development of high density Gigabit Ethernet communications and storage equipment.The Xilinx Tri-Mode Ethernet MAC core is a parameterizable core ideally suited for use in networking equipment such as switches and routers. The customizable TEMAC core enables system designers to implement a broad range of integrated Ethernet designs, from low cost 10/100 Ethernet to higher performance 1 Gigabit ports. The TEMAC core is designed to the IEEE 802.3 specification and operates in 1000Mbps, 100 Mbps, and 10 Mbps modes. In addition, it supports both half and full duplex operation. In 1000 Mbps mode, the TEMAC core interfaces with industry standard PHY devices through a GMII/RGMII interface. In 10/100 Mbps mode, the TEMAC uses the MII interface. The Xilinx Tri-Mode Ethernet MAC, combined with the Ethernet 1000BASE-X PCS/PMA or SGMII core, provides a complete and highly flexible solution for the implementation of Ethernet Link and Physical layers. The TEMAC core is delivered through the Xilinx CORE Generator™ tool and is part of the comprehensive suite of Xilinx Ethernet solutions.
关键特性
Designed to IEEE 802.3-2005 specification
Reconciliation sublayer with GMII/MII or RGMII
Configurable half-duplex and full-duplex operation
Configured and monitored through an optional independent microprocessor-neutral interface
Configurable flow control through MAC Control pause frames; symmetrically or asymmetrically enabled
Optional MDIO interface to managed objects in PHY layers (MII Management)
Optional clock enables to reduce clock resource usage
Support of VLAN frames to specification IEEE 802.3-2005
Optional address filter with a selectable number of address table entries
Configurable support of jumbo frames of any length
Configurable inter-frame gap adjustment
Configurable in-band FCS field passing on both transmit and receive paths