社区导航

 

搜索
查看: 3431|回复: 1

[讨论] 93C46/93c06/93c46/93c56/93c66/93c86的驱动程序

[复制链接]

1387

TA的帖子

0

TA的资源

裸片初长成(中级)

Rank: 11Rank: 11Rank: 11Rank: 11

发表于 2006-7-12 10:36 | 显示全部楼层

93C46/93c06/93c46/93c56/93c66/93c86的驱动程序

/*————————————————————
〖说明〗SPI总线驱动程序 包括的普通封装标准模式,特殊封装标准模式
默认11.0592Mhz的晶振。
—————————————————————*/
/*通用93c06-93c86系列使用说明
93c06=93c4693c56=93c6693c76=93c86
dipx 可以自行定义*/
#include "reg51.h"
#include "intrins.h"
/*-----------------------------------------------------
SPI93cXX系列时序函数调用(普通封装)
调用方式:自行定义﹫2001/05/12
函数说明:私有函数,封装各接口定义
-----------------------------------------------------*/
#define di_93 dip3
#define sk_93 dip2
#define cs_93 dip1
#define do_93 dip4
#define gnd_93 dip5
#define org_93 dip6
sbit cs_93=P1^0;
sbit sk_93=P1^1;
sbit di_93=P1^2;
sbit do_93=P1^3;
sbit org_93=P0^4;
/*-----------------------------------------------------
SPI93cXX系列时序函数调用(普通封装)
调用方式:void high46(void) ---高8位函数调用
void low46(void) ---低8位函数调用﹫2001/05/12
函数说明:私有函数,SPI专用93c46普通封装驱动程序
-----------------------------------------------------*/
void high46(void)
{
di_93=1;
sk_93=1; _nop_();
sk_93=0;_nop_();
}
void low46(void)
{
di_93=0;
sk_93=1;_nop_();
sk_93=0;_nop_();
}
void wd46(unsigned char dd)
{
unsigned char i;
for (i=0;i<8;i++)
{
if (dd>=0x80) high46();
else low46();
dd=dd<<1;
}
}
unsigned char rd46(void)
{
unsigned char i,dd;
do_93=1;
for (i=0;i<8;i++)
{
dd<<=1;
sk_93=1;_nop_();
sk_93=0;_nop_();
if (do_93) dd|=1;
}
return(dd);
}
/*-----------------------------------------------------
SPI93cXX系列时序函数调用(特殊封装)
调用方式:自行定义﹫2001/05/12
函数说明:私有函数,特殊封装各接口定义
-----------------------------------------------------*/
#define di_93a dip5
#define sk_93a dip4
#define cs_93a dip3
#define do_93a dip6
#define gnd_93a dip7
#define vcc_93a out_vcc(2)
sbit cs_93a=P1^0;
sbit sk_93a=P1^1;
sbit di_93a=P1^2;
sbit do_93a=P1^3;
/*-----------------------------------------------------
SPI93cXX系列时序函数调用(特殊封装)
调用方式:void high46a(void) ---高8位函数调用
void low46a(void) ---低8位函数调用﹫2001/05/12
函数说明:私有函数,SPI专用93c46特殊封装驱动程序
-----------------------------------------------------*/
void high46a(void)
{
di_93a=1;
sk_93a=1;_nop_();
sk_93a=0;_nop_();
}
void low46a(void)
{
di_93a=0;
sk_93a=1;_nop_();
sk_93a=0;
_nop_();
}
void wd46a(unsigned char dd)
{
unsigned char i;
for (i=0;i<8;i++)
{
if (dd>=0x80) high46a();
else low46a();
dd=dd<<1;
}
}
unsigned char rd46a(void)
{
unsigned char i,dd;
do_93a=1;
for (i=0;i<8;i++)
{
dd<<=1;
sk_93a=1;_nop_();
sk_93a=0;_nop_();
if (do_93a) dd|=1;
}
return(dd);
}
/*-----------------------------------------------------
SPI93c46系列函数调用(举例)
调用方式:bit write93c56_word(unsigned int address,unsigned int dat) ﹫2001/05/12
函数说明:私有函数,SPI专用
-----------------------------------------------------*/
void ewen46(void)
{
_nop_();
cs_93=1;
high46();
wd46(0x30);
cs_93=0;
}
unsigned int read93c46_word(unsigned char address)
{
unsigned int dat;
unsigned char dat0,dat1;
gnd_93a=0;
gnd_93=0;
cs_93=sk_93=0;
org_93=1;
cs_93=1;_nop_();
address=address>>1;
address=address|0x80;
address=address|0x80;
high46();
wd46(address);
dat1=rd46();
dat0=rd46();
cs_93=0;
dat=dat1*256+dat0;
return(dat);
}
bit write93c46_word(unsigned char address,unsigned int dat)
{
unsigned char e,temp=address;
e=0;
while (e<3)
{
gnd_93a=0;
gnd_93=0;
cs_93=sk_93=0;
org_93=1;
cs_93=1;
ewen46();
_nop_();
cs_93=1;
_nop_();
high46();
address|=0x80;
address>>=1;//??
address|=0x40;
wd46(address);
wd46(dat/256);
wd46(dat%256);
cs_93=0;
_nop_();
cs_93=1;
time=0;do_93=1;
while (1)
{
if (do_93==1) break;
if (time>20) break;
}
cs_93=0;
if (read93c46_word(temp)==dat)
{
return(0);
}
e++;
}
return(1);
}
/*-----------------------------------------------------
SPI93c57系列函数调用(举例)
调用方式:bit write93c57_word(unsigned int address,unsigned int dat) ﹫2001/05/12
函数说明:私有函数,SPI专用
-----------------------------------------------------*/
void ewen57(void)
{
_nop_();
cs_93=1;
dip7=0;
high46();
low46();
wd46(0x60);
cs_93=0;
}
unsigned int read93c57_word(unsigned int address)
{
unsigned int dat;
unsigned char dat0,dat1;
gnd_93=0;
cs_93=sk_93=0;
org_93=1;
cs_93=1;
address=address>>1;
high46();
high46();
wd46(address);
dat1=rd46();
dat0=rd46();
cs_93=0;
dat=dat1*256+dat0;
return(dat);
}
bit write93c57_word(unsigned int address,unsigned int dat)
{
unsigned char e;
unsigned int temp=address;
e=0;
while (e<3)
{
gnd_93=0;
cs_93=sk_93=0;
org_93=1;
cs_93=1;
ewen57();
cs_93=1;
_nop_();
high46();
low46();
address>>=1;
address|=0x80;
wd46(address);
wd46(dat/256);
wd46(dat%256);
cs_93=0;
_nop_();
cs_93=1;
time=0;
do_93=1;
while (1)
{
if (do_93==1) break;
if (time>20) break;
}
cs_93=0;
if (read93c57_word(temp)==dat)
{
return(0);
}
e++;
}
return(1);
}
/*-----------------------------------------------------
SPI93c56系列函数调用(举例)
调用方式:bit write93c56_word(unsigned int address,unsigned int dat) ﹫2001/05/12
函数说明:私有函数,SPI专用
-----------------------------------------------------*/
void ewen56(void)
{
_nop_();
cs_93=1;
high46();
low46();
low46();
wd46(0xc0);
cs_93=0;
}
unsigned int read93c56_word(unsigned char address)
{
unsigned int dat;
unsigned char dat0,dat1;
gnd_93=0;
cs_93=sk_93=0;
org_93=1;
cs_93=1;
address=address>>1;
high46();
high46();
low46();
wd46(address);
dat1=rd46();
dat0=rd46();
cs_93=0;
dat=dat1*256+dat0;
return(dat);
}
bit write93c56_word(unsigned char address,unsigned int dat)
{
unsigned char e;
unsigned int temp=address;
e=0;
while (e<3)
{
gnd_93=0;
cs_93=sk_93=0;
org_93=1;
cs_93=1;
ewen56();
_nop_();
cs_93=1;
_nop_();
high46();
low46();
high46();
address>>=1;
wd46(address);
wd46(dat/256);
wd46(dat%256);
cs_93=0;
_nop_();
cs_93=1;
TH0=0;
time=0;
do_93=1;
while (1)
{
if (do_93==1) break;
if (time) break;
}
cs_93=0;
if (read93c56_word(temp)==dat)
{
return(0);
}
e++;
}
return(1);
}
/*-----------------------------------------------------
SPI93c76与SPI93c86系列函数调用(举例)
调用方式:bit write93c76_word(unsigned int address,unsigned int dat) ﹫2001/05/12
函数说明:私有函数,SPI专用
-----------------------------------------------------*/
void ewen76(void)
{
_nop_();
cs_93=1;
dip7=1;
high46();
low46();
low46();
high46();
high46();
wd46(0xff);
cs_93=0;
}
unsigned int read93c76_word(unsigned int address)
{
unsigned char dat0,dat1;
gnd_93=0;
cs_93=sk_93=0;
org_93=1;
cs_93=1;
address>>=1;
high46();
high46();
low46();
if((address&0x200)==0x200) high46();
else low46();
if ((address&0x100)==0x100) high46();
else low46();
wd46(address);
dat1=rd46();
dat0=rd46();
cs_93=0;
return(dat1*256|dat0);
}
bit write93c76_word(unsigned int address,unsigned int dat)
{
unsigned char e;
unsigned int temp=address;
e=0;
address>>=1;
while (e<3)
{
gnd_93=0;
cs_93=sk_93=0;
org_93=1;
cs_93=1;
ewen76();
_nop_();
cs_93=1;
high46();
low46();
high46();
if((address&0x200)==0x200) high46();
else low46();
if ((address&0x100)==0x100) high46();
else low46();
wd46(address);
wd46(dat/256);
wd46(dat%256);
cs_93=0;_nop_();cs_93=1;
time=0;do_93=1;
while (1)
{
if (do_93==1) break;
if (time>10) break;
}
cs_93=0;
e++;
}
return(1);
}
/*-----------------------------------------------------
主函数调用(举例)
调用方式:main() ﹫2001/05/12
函数说明:私有函数,SPI专用
-----------------------------------------------------*/
main()
{ bit b;
unsigned int i;
unsigned int j[32],k;
for(i=0;i<32;i++)
j=read93c56_word(i);
for(i=0;i<32;i++)
write93c56_word(i,0x0909);
i=0;
b=write93c56_word(i,0x0909);
j=read93c56_word(i);
i=1;
b=write93c56_word(i,0x1111);
j=read93c56_word(i);
i=2;
b=write93c56_word(i,0x2222);
j=read93c56_word(i);
}



回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

关闭

站长推荐上一条 /8 下一条

  • 论坛活动 E手掌握

    扫码关注
    EEWORLD 官方微信

  • EE福利  唾手可得

    扫码关注
    EE福利 唾手可得

Archiver|手机版|小黑屋|电子工程世界 ( 京ICP证 060456 )

GMT+8, 2019-12-7 12:56 , Processed in 0.077000 second(s), 17 queries , Gzip On, MemCache On.

快速回复 返回顶部 返回列表